AVW: Broadcast, RF and Audio Visual Equipment Wholesalers

RDL STICK-ON® SERIES

STICK-ONs are the original application-specific modules for the A/V, recording and broadcast industries. Module functions include signal detection, switching, pre-amplification, format conversion, line driving, power amplification, mixing, distribution, gain control, equalization, routing and more. Each STICK-ON® is an ultra-compact module engineered to provide higher performance and longer life than other industry products. STICK-ON modules are solid encapsulated hybrid circuits in durable industrial black plastic enclosures (1.55″, 3.94 cm x 3″, 7.62 cm x 0.65″, 1.65 cm) with clear bold white lettering for the terminal block connections, recessed trimming controls and switches.

Since RDL first originated application-specific modules, STICK-ONs have led the industry in economical, high-performance and cost-effective long life solutions in system designs. Multiple STICK-ON® modules can be interconnected to form all or part of an A/V system. A single STICK-ON® module may be mounted right where its function is needed, often to add an input, output, or gain adjustment to existing equipment. STICK-ON® modules allow customizing an A/V system to precisely match users’ needs. Adding STICK-ONs to an existing system can extend system life by adding updated features, resulting in considerable cost savings. A complete range of backboard and rack mounting options is available for systems comprised of multiple STICK-ON modules.

The technology used in STICK-ON® modules has been regularly updated over the years to insure industry-leading performance. Functions and features provided by STICK-ONs, since their introduction, are still available today. This continuity in product offering and support makes STICK-ON® modules the preferred long-term resource for system design solutions. STICK-ON® SERIES modules are designed and manufactured in the U.S.A.

RDL STICK-ON® SERIES

DRA-35S

STICK-ON DIN Rail Adapter – 1 module Highlights • Mounts One RDL STICK-ON® Module to 35 mm DIN Rail • Compact Design Permits Mounting Multiple Modules to a Single DIN Rail • Ideal for Use when Traditional Rack Mounting is Not Desired

DRA-35S6

STICK-ON DIN Rail Adapter – 6 modules Highlights • Mounts Six RDL STICK-ON® Module to 35 mm DIN Rail • Removable Shelves for Easy Installation and Module Adjustment • Ideal for Use when Traditional Rack Mounting is Not Desired

MSR-1

Snap Rail Adapter – STICK-ON Series Highlights • Mounts One RDL STICK-ON® to a 3.2 Inch Snap Rail • Provides Easy, Secure Mounting • All-Steel Construction

ST-ACR1

Line-Level Audio Controlled Relay – 0.5 to 5 s Highlights • Switching Controlled by Audio Signal • Sensing of Line-Level Signal • Silence Sensing • DPDT Switching Contacts • Open-Collector SLAVE Output

ST-ACR1M

Microphone Level Audio Controlled Relay – 0.5 to 5 s delay Highlights • Switching Controlled by Audio Signal • Sensing of Microphone-Level Signal • Silence Sensing • DPDT Switching Contacts • Open-Collector SLAVE Output

ST-ACR2

Line-Level Audio Controlled Relay – 5 to 50 s delay Highlights • Switching Controlled by Audio Signal • Sensing of Line-Level Signal • Silence Sensing • DPDT Switching Contacts • Open-Collector SLAVE Output

ST-CL2

ST-CX2

Two Band Active Line-level Crossover Highlights • Active Low-Frequency Woofer Equalization • Active Full-Range Equalization • Adjustable Equalization • Crossover with Loop-through Output • Low-Noise and Low-Distortion Crossover • RDL® SupplyFlex™ Power Input Configuration

ST-CX2S

Subwoofer Crossover Filter Highlights • Active Subwoofer Equalization • Subwoofer Signal from Stereo Source • Adjustable Low-Frequency Boost • Low-Noise and Low-Distortion Crossover • Active Crossover Component • RDL® SupplyFlex™ Power Input Configuration

ST-DA3

ST-EQ3

3 Band Equalizer – Line Level Highlights • 3-Band Audio Equalization • Custom Tailored Audio Bandwidth • Adjust To Pass Voice-Band Audio • Adjust To Produce Smile-Curve for Music • Low Noise and Low Distortion Equalization

ST-FS6

Ferrite Suppressor / RF Filter Highlights • RF Suppression in Audio or Control Circuits • Suppression with no Capacitance to Ground • Suppression without Series Resistance • Six Audio Conductors Suppressed • Attenuation > 10 dB @ 10 MHz • Attenuation > 25 dB @ 200 MHz

ST-GCA3

Gain Control Amplifier – Line Level Highlights • Automatic Gain Control • Wide Dynamic Range AGC • Slow Inaudible Gain-Reduction • Tight Dynamic Control • Positive, Fast Gain Reduction • Low-Noise and Low-Distortion AGC • RDL® SupplyFlex™ Power Input Configuration

ST-GLA1

ST-GSP1

ST-HP3

High Pass Filter – 300 Hz and 500 Hz Highlights • Horn Loudspeaker Protection • Low-Frequency Attenuation below 300 Hz • Low-Frequency Attenuation below 500 Hz • Line-Level Input and Outputs • Filtering Requiring no Field Adjustment • RDL® SupplyFlex™ Power Input Configuration

ST-IC1

Intercom Amplifier Highlights • Intercom Electronics • Intercom with Push-to-Talk • Mic or Speaker Input • 8 Ω or 45 Ω Speakers • Bidirectional Communication Option

ST-LCR1

Logic Controlled Relay – Momentary Highlights • Add Contacts to Any Control Signal • Activation from Logic Circuits • DPDT Switching Relay • Open-Collector Switching • Control from Switch, Button or Logic Circuits

ST-LCR1H

High Power Logic Controlled Relay – 8 A Highlights • Switching of Speaker Lines • Control from Switch or Logic Circuits • DPDT Switching Contacts • Open-Collector Switching • 8 Amp Relay Contacts

ST-LCR2

Logic Controlled Relay – Latching Highlights • Alternate-Action Switching • Add Contacts to Any Control Signal • Activation from Logic Circuits • DPDT Switching Relay • Open-Collector Switching • Control from Switch, Button, or Logic Circuits

ST-LCR3

ST-MA2

2 W Mono Audio Amplifier with Muting – 8 Ω Highlights • Single-Speaker Monitor Amplifier • Conferencing Monitor Amp • Monitor Amp with Muting and Externally Actuated Attenuation Steps • Fast, Silent Audio Switching • Multiple Control Inputs • Adjustable Gain

ST-MPA24

ST-MPA48

Dual Microphone Phantom Adapter – 48 V Highlights • Phantom Adapter for Two Mics • 48 Vdc Fixed Phantom Voltage • P48 per IEC 61938 • Operates From External 12 V Battery or 24 V Power Supply • Phantom Conversion with Full Frequency Response

ST-MX2

ST-MX3

ST-NG1

White and Pink Noise Generator Highlights • Random Noise Source • Masking Noise Sources • Pink Noise • White Noise • Mic and/or Line Level Noise Signals

ST-OSC2A

Audio Oscillator – 1kHz and 10 kHz Highlights • Precision Sine-Wave Audio Signal • Amplitude-Stable Oscillator • Two Single-Tone Oscillators • 1 kHz and 10 kHz • Precise User-Adjustable Levels • Each Oscillator Has Two Separate Outputs • RDL SupplyFlex Power Input Configuration

ST-OSC2B

ST-PA18

ST-PA2

2 W Mono Audio Amplifier – 8 Ω Highlights • 2 Watts RMS into 8 Ω • +12 dBu Into 600 Ω • Quality Utility Amplifier • Intercom Driver • Music-On-Hold Driver

ST-PA6

6 W Mono Audio Amplifier – 8 Ω Highlights • 6 Watts RMS into 8 Ω • Amplifier with Balanced Audio Inputs • Built-In 2-Input Mixer • Low-Noise and Low-Distortion Amplifier • Amplifier with Loudness Equalization

ST-PBR4

STICK-ON Mounting Bracket Highlights • Mounts up to 4 RDL STICK-ON® Modules to an RDL FP-PSB1A Bracket or RDL FLAT-PAK™ Rack Mount Track • May be Used to Mount STICK-ON® Modules to a Flat Surface • STICK-ON® Modules Slide In and Click Into Place • All-Steel Construction

ST-PD5U

Power Distributor – Switching – (PS-24AS/KS/V3A) Highlights • Distribution of 24 Vdc Power • Soft-Start from Switching Supply • Distribution of dc Power • Up to 5 Power Distribution Points • Voltage Presence Indication • Reverse Voltage Protection

ST-PH1

Stereo Phono Preamplifier Highlights • Stereo or Mono Phono Preamplifier • Balanced or Unbalanced Outputs • Outputs Drive Hi or Low Impedance Lines • Accurate, Low-Noise Preamplification • Adjustable Left and Right Output Levels • RDL® SupplyFlex™ Power Input Configuration

ST-RG1

ST-RRB1

Rear rack rail mounting kit for any STICK-ON module Highlights • Mounts in the back of a rack • Mounts to any flat surface

ST-RX2

Audio Routing Switcher – 1×2 Highlights • Routing of a Line-Level Source • Audio Switched to One of Two Destinations • Silent Audio Switching • Balanced or Unbalanced Routing • Switching by Open-Collector Logic

ST-SH2

Stereo Headphone Amplifier – STICK-ON Series Highlights • Stereophonic Headphone Amplifier • Provision for External Stereo Level Control • Balanced or Unbalanced Input • Bridge a Line and Feed Headsets • Amplifier To Drive High or Low Impedance Headsets

ST-SSR1

Line-Level Audio Switch – 2×1 Highlights • Switch Line Level Sources • Select Between Two Balanced Lines • Silent Audio Switching • Switching Without Hard Relay Contacts • Fast Switching for Audio Muting • Selection by Open-Collector Logic

ST-SX4

Unbalanced Audio Switcher – 4×1 Highlights • Select 1 of 4 Unbalanced Audio Sources • Audio Selection from Remote Location • Remote Switching from Single Control Pair • All Solid-State Audio Switching • Slave Capability for Stereo Switching

ST-TC1

Telephone System Coupler – CO Line Simulator Highlights • Simulate a Telco CO Line • Connect to local telephone switch or instrument • Add Radio Control or Paging to KSU • Contact Closure when Line is Off-hook • Audio Input/Output from Telephone Switching Unit

ST-UBA2

Unbalanced to Balanced Amplifier – 2 channel Highlights • Convert Stereo IHF Levels to Stereo PRO • Additional Summed MONO OUT • Independently Adjustable Gain • Ground-Referenced Conversion Module • Dual-LED VU Metering for Each Channel Included • Unparalleled Audio Performance

ST-UMX3

ST-VCA3

Voltage Controlled Amplifier Highlights • Audio Level Control from a DC Voltage • Audio Level Remote Control • Two Wire with Shield or Three Wire Control • VCA with Microphone or Line Level Input • VCA with Line-Level Output • VCA with LED Metering of Operating Level

ST-VOX1

STICK-ON DIN Rail Adapter – 1 module

Highlights

• Mounts One RDL STICK-ON® Module to 35 mm DIN Rail
• Compact Design Permits Mounting Multiple Modules to a Single DIN Rail
• Ideal for Use when Traditional Rack Mounting is Not Desired

STICK-ON DIN Rail Adapter – 6 modules

Highlights

• Mounts Six RDL STICK-ON® Module to 35 mm DIN Rail
• Removable Shelves for Easy Installation and Module Adjustment
• Ideal for Use when Traditional Rack Mounting is Not Desired

Snap Rail Adapter – STICK-ON Series

Highlights

• Mounts One RDL STICK-ON® to a 3.2 Inch Snap Rail
• Provides Easy, Secure Mounting
• All-Steel Construction

Line-Level Audio Controlled Relay – 0.5 to 5 s

Highlights

• Switching Controlled by Audio Signal
• Sensing of Line-Level Signal
• Silence Sensing
• DPDT Switching Contacts
• Open-Collector SLAVE Output

Microphone Level Audio Controlled Relay – 0.5 to 5 s delay

Highlights

• Switching Controlled by Audio Signal
• Sensing of Microphone-Level Signal
• Silence Sensing
• DPDT Switching Contacts
• Open-Collector SLAVE Output

Line-Level Audio Controlled Relay – 5 to 50 s delay

Highlights

• Switching Controlled by Audio Signal
• Sensing of Line-Level Signal
• Silence Sensing
• DPDT Switching Contacts
• Open-Collector SLAVE Output

Two Band Active Line-level Crossover

Highlights

• Active Low-Frequency Woofer Equalization
• Active Full-Range Equalization
• Adjustable Equalization
• Crossover with Loop-through Output
• Low-Noise and Low-Distortion Crossover
• RDL® SupplyFlex™ Power Input Configuration

Subwoofer Crossover Filter

Highlights

• Active Subwoofer Equalization
• Subwoofer Signal from Stereo Source
• Adjustable Low-Frequency Boost
• Low-Noise and Low-Distortion Crossover
• Active Crossover Component
• RDL® SupplyFlex™ Power Input Configuration

3 Band Equalizer – Line Level

Highlights

• 3-Band Audio Equalization
• Custom Tailored Audio Bandwidth
• Adjust To Pass Voice-Band Audio
• Adjust To Produce Smile-Curve for Music
• Low Noise and Low Distortion Equalization

Ferrite Suppressor / RF Filter

Highlights

• RF Suppression in Audio or Control Circuits
• Suppression with no Capacitance to Ground
• Suppression without Series Resistance
• Six Audio Conductors Suppressed
• Attenuation > 10 dB @ 10 MHz
• Attenuation > 25 dB @ 200 MHz

Gain Control Amplifier – Line Level

Highlights

• Automatic Gain Control
• Wide Dynamic Range AGC
• Slow Inaudible Gain-Reduction
• Tight Dynamic Control
• Positive, Fast Gain Reduction
• Low-Noise and Low-Distortion AGC
• RDL® SupplyFlex™ Power Input Configuration

High Pass Filter – 300 Hz and 500 Hz

Highlights

• Horn Loudspeaker Protection
• Low-Frequency Attenuation below 300 Hz
• Low-Frequency Attenuation below 500 Hz
• Line-Level Input and Outputs
• Filtering Requiring no Field Adjustment
• RDL® SupplyFlex™ Power Input Configuration

Intercom Amplifier

Highlights

• Intercom Electronics
• Intercom with Push-to-Talk
• Mic or Speaker Input
• 8 Ω or 45 Ω Speakers
• Bidirectional Communication Option

Logic Controlled Relay – Momentary

Highlights

• Add Contacts to Any Control Signal
• Activation from Logic Circuits
• DPDT Switching Relay
• Open-Collector Switching
• Control from Switch, Button or Logic Circuits

High Power Logic Controlled Relay – 8 A

Highlights

• Switching of Speaker Lines
• Control from Switch or Logic Circuits
• DPDT Switching Contacts
• Open-Collector Switching
• 8 Amp Relay Contacts

Logic Controlled Relay – Latching

Highlights

• Alternate-Action Switching
• Add Contacts to Any Control Signal
• Activation from Logic Circuits
• DPDT Switching Relay
• Open-Collector Switching
• Control from Switch, Button, or Logic Circuits

2 W Mono Audio Amplifier with Muting – 8 Ω

Highlights

• Single-Speaker Monitor Amplifier
• Conferencing Monitor Amp
• Monitor Amp with Muting and Externally Actuated Attenuation Steps
• Fast, Silent Audio Switching
• Multiple Control Inputs
• Adjustable Gain

Dual Microphone Phantom Adapter – 48 V

Highlights

• Phantom Adapter for Two Mics
• 48 Vdc Fixed Phantom Voltage
• P48 per IEC 61938
• Operates From External 12 V Battery or 24 V Power Supply
• Phantom Conversion with Full Frequency Response

White and Pink Noise Generator

Highlights

• Random Noise Source
• Masking Noise Sources
• Pink Noise
• White Noise
• Mic and/or Line Level Noise Signals

Audio Oscillator – 1kHz and 10 kHz

Highlights

• Precision Sine-Wave Audio Signal
• Amplitude-Stable Oscillator
• Two Single-Tone Oscillators
• 1 kHz and 10 kHz
• Precise User-Adjustable Levels
• Each Oscillator Has Two Separate Outputs
• RDL SupplyFlex Power Input Configuration

2 W Mono Audio Amplifier – 8 Ω

Highlights

• 2 Watts RMS into 8 Ω
• +12 dBu Into 600 Ω
• Quality Utility Amplifier
• Intercom Driver
• Music-On-Hold Driver

6 W Mono Audio Amplifier – 8 Ω

Highlights

• 6 Watts RMS into 8 Ω
• Amplifier with Balanced Audio Inputs
• Built-In 2-Input Mixer
• Low-Noise and Low-Distortion Amplifier
• Amplifier with Loudness Equalization

STICK-ON Mounting Bracket

Highlights

• Mounts up to 4 RDL STICK-ON® Modules to an RDL FP-PSB1A Bracket or RDL FLAT-PAK™ Rack Mount Track
• May be Used to Mount STICK-ON® Modules to a Flat Surface
• STICK-ON® Modules Slide In and Click Into Place
• All-Steel Construction

Power Distributor – Switching – (PS-24AS/KS/V3A)

Highlights

• Distribution of 24 Vdc Power
• Soft-Start from Switching Supply
• Distribution of dc Power
• Up to 5 Power Distribution Points
• Voltage Presence Indication
• Reverse Voltage Protection

Stereo Phono Preamplifier

Highlights

• Stereo or Mono Phono Preamplifier
• Balanced or Unbalanced Outputs
• Outputs Drive Hi or Low Impedance Lines
• Accurate, Low-Noise Preamplification
• Adjustable Left and Right Output Levels
• RDL® SupplyFlex™ Power Input Configuration

Rear rack rail mounting kit for any STICK-ON module

Highlights

• Mounts in the back of a rack
• Mounts to any flat surface

Audio Routing Switcher – 1×2

Highlights

• Routing of a Line-Level Source
• Audio Switched to One of Two Destinations
• Silent Audio Switching
• Balanced or Unbalanced Routing
• Switching by Open-Collector Logic

Stereo Headphone Amplifier – STICK-ON Series

Highlights

• Stereophonic Headphone Amplifier
• Provision for External Stereo Level Control
• Balanced or Unbalanced Input
• Bridge a Line and Feed Headsets
• Amplifier To Drive High or Low Impedance Headsets

Line-Level Audio Switch – 2×1

Highlights

• Switch Line Level Sources
• Select Between Two Balanced Lines
• Silent Audio Switching
• Switching Without Hard Relay Contacts
• Fast Switching for Audio Muting
• Selection by Open-Collector Logic

Unbalanced Audio Switcher – 4×1

Highlights

• Select 1 of 4 Unbalanced Audio Sources
• Audio Selection from Remote Location
• Remote Switching from Single Control Pair
• All Solid-State Audio Switching
• Slave Capability for Stereo Switching

Telephone System Coupler – CO Line Simulator

Highlights

• Simulate a Telco CO Line
• Connect to local telephone switch or instrument
• Add Radio Control or Paging to KSU
• Contact Closure when Line is Off-hook
• Audio Input/Output from Telephone Switching Unit

Unbalanced to Balanced Amplifier – 2 channel

Highlights

• Convert Stereo IHF Levels to Stereo PRO
• Additional Summed MONO OUT
• Independently Adjustable Gain
• Ground-Referenced Conversion Module
• Dual-LED VU Metering for Each Channel Included
• Unparalleled Audio Performance

Voltage Controlled Amplifier

Highlights

• Audio Level Control from a DC Voltage
• Audio Level Remote Control
• Two Wire with Shield or Three Wire Control
• VCA with Microphone or Line Level Input
• VCA with Line-Level Output
• VCA with LED Metering of Operating Level

Voice Operated Relay

Highlights

• Switching Controlled by Voice Signal
• Switching from Mic or Line Level Signals
• Precise Threshold Adjustment
• DPDT Switching Contacts
• Open-Collector SLAVE Output

Voice-Over / Paging Module – Manual

Highlights

• High-Quality Voice-Over Mixing
• Noiseless Paging
• Single Input Adapted for Paging or Voice-Over
• Selectable Fade-Under or Hard-Cut
• Adjustable Fade DEPTH and RATE
• Soft Audio Switching

Automatic Ducking Module

Highlights

• Fully AUTOMATIC Voice-Over Mixing
• Noiseless Paging
• Adjustable Fade Depth
• Setting to Fade Music Fully Off
• Adjustable Recovery Rate
• Built-in AGC Compressor on Music Input

Passive Audio Divider/Combiner – 10 kΩ

Highlights

• 10 kΩ Operation
• Combine Audio Signals to a Single Output
• Filter RF from an Audio Line
• Combine Stereo Signals
• Feed a Mono Signal to Stereo Inputs
• Combine Multiple Mics to a Single Amp
• Compactness of RDL STICK-ONs®

Passive Audio Divider/Combiner – 150 Ω

Highlights

• 150 Ω Operation
• Combine Audio Signals to a Single Output
• Filter RF from an Audio Line
• Combine Stereo Signals
• Feed a Mono Signal to Stereo Inputs
• Combine Multiple Mics to a Single Amp
• Compactness of RDL STICK-ONs®

Passive Audio Divider/Combiner – 600 Ω

Highlights

• 600 Ω Operation
• Combine Audio Signals to a Single Output
• Filter RF from an Audio Line
• Combine Stereo Signals
• Feed a Mono Signal to Stereo Inputs
• Combine Multiple Mics to a Single Amp
• Compactness of RDL STICK-ONs®

Microphone Preamplifier – 50 dB Gain

Highlights

• High or Low Impedance Input Mic Preamp
• Fixed 50 dB Gain for Consistency
• Balanced or Unbalanced Output
• Phantom Capability
• RF-Filtered Inputs and Outputs
• Excellent Performance
• STICK-ON® Convenience

Adjustable Gain Microphone Preamplifier – 35 to 65 dB Gain

Highlights

• Low-Noise Mic Preamp
• Adjustable Output Level
• High or Low Impedance Mic Inputs
• Mic Input to 2 Line Outputs
• Two Balanced or Unbalanced Outputs
• Phantom Capability
• RF-Filtered Inputs

High Gain Microphone Preamplifier – 45 to 75 dB Gain

Highlights

• Low-Noise, High-Gain, Mic Preamp
• Adjustable Output Levels
• High or Low Impedance Mic Inputs
• Mic Input to Line Outputs
• Two Balanced or Unbalanced Outputs
• Phantom Capability
• RF-Filtered Inputs

Microphone Level Distribution Amplifier – 1×3

Highlights

• Feed 1 Microphone to 3 Microphone Inputs
• Electrical and Audio Isolation
• Studio Quality Low-Noise, Low-Distortion Performance
• Excellent Phase Response
• Versatility of STICK-ON® Compactness

Universal Audio Attenuator – 2 channel

Highlights

• Audio Level Attenuation
• Adjust Audio Level into Equipment
• Preset Audio Levels
• Precisely Match Audio Levels
• Increase Audio Input Headroom
• Two Adjustable Attenuators in One Package

STICK-ON Series 19″ Racking System – 12 modules

Highlights

• Mounts up to 12 RDL STICK-ON® Modules in a 19″ Rack
• Occupies Two RUs in a 19″ Rack
• Hinged Front Panel for Easy Access
• STICK-ON® Modules Slide In and Click Into Place
• All-Steel Construction

STICK-ON Series 19″ Racking System – 10 modules

Highlights

• Mounts up to 10 RDL STICK-ON® Modules in a 19″ Rack
• Occupies Two RUs in a 19″ Rack
• Hinged Front Panel for Easy Access
• STICK-ON® Modules Attach with RDL Detachable Mounting Tabs
• All-Steel Construction

10.4″ Rack Mount for 6 STICK-ON Series Products

Highlights

• Mounts up to 6 RDL STICK-ON® Modules in a 10.4″ Rack
• Occupies Two RUs in a 10.4″ Rack
• Hinged Front Panel for Easy Access
• STICK-ON® Modules Slide In and Click Into Place
• All-Steel Construction

STICK-ON Mounting Plate

Highlights

• Fasten SMK-12 to mounting surface using screws.
• SURFACE MOUNT: Mount up to 6 units surface mounted
• EDGE MOUNT: Typically edge mounts 12 STICK-ONs (16 max)

STICK-ON Series 19″ Mounting Rack – 10 modules

Highlights

• Mounts up to 10 RDL STICK-ON® Modules to a Backboard or other Flat Surface
• STICK-ON® Modules Attach with RDL Detachable Mounting Tabs
• Easy Installation with Provision for Cable Harnessing
• All-Steel Construction

STICK-ON Series 19″ Mounting Rack – 12 modules

Highlights

• Mounts up to 12 RDL STICK-ON® Modules to a Backboard or other Flat Surface
• STICK-ON® Modules Slide In and Click Into Place
• Easy Installation with Provision for Cable Harnessing
• All-Steel Construction

Shielded Chassis for STICK-ON module

Highlights

• Shielded Chassis for STICK-ON module