Highlights

• Maintain Clarity
• Maximize Loudness
• Maximize Stereo Separation
• Reduce Subcarrier Crosstalk
• Assure Consistency of your Signal Coverage
• Maintain Positive Control of Multipath Artifacts
• Maximize Performance From Your FM Transmitter
• Mount using RU Series Mounting Options
 

Highlights

• Mounts One RDL RACK-UP® Module to 35 mm DIN Rail
• Allows Full Access to the Front and Rear Panels of the Mounted Module
• Ideal for Use when Traditional Rack Mounting is Not Desired
 

Highlights

• Stereo Audio Distribution with 4 Outputs
• Mono Audio Distribution with 8 Outputs
• Front-Panel Input Level Trimmers
• Dual-LED VU Meter for Each Input Channel
• Front-Panel Output Level Trimmers
• Inputs and Outputs on Rear Panel Detachable Terminal Blocks
• Exceptional Audio Quality for the Most Demanding Applications
 

Highlights

• Stereo Audio Distribution with 8 Outputs
• Mono Audio Distribution with 16 Outputs
• Front-Panel Input Level Trimmers
• Dual-LED VU Meter for Each Input Channel
• Front-Panel Output Level Trimmers
• Inputs and Outputs on Rear Panel Detachable Terminal Blocks
• Exceptional Audio Quality for the Most Demanding Applications
 

Highlights

• Studio Quality, Low Noise DSP Audio Delay
• Separate Time Delays for Two Audio Outputs
• Adjustable Delay from 0 to 135 mS
• Large Numeric Display of Time Delay
• Fully Remote Controllable Audio Delay
• Provision to Disable Front Panel Adjustment
• XLR and Terminal Block Audio Connections
• Exclusive RDL Sure-Lok™ Supervision
 

Highlights

• Unparalleled Audio Performance
• Unbalanced to Balanced Audio Conversion
• Additional Summed MONO Out
• Switch-Selectable Ground Lift for XLR Output Jacks
• Balanced to Unbalanced Audio Conversion
• Unbalanced RCA Connections on Front Panel
• Balanced XLR Connections on Front Panel
• Balanced Connections on Rear Panel Detachable Terminal Blocks
• Front-Panel Multi-Turn LEVEL Trimmers
• Dual-LED VU Meter for Each Channel
• Gold-Plated Connectors
• Exceptional Headroom and Frequency Response
• 1/3 Rack, High Density Rack Mounting
 

Highlights

• Local or Remote Controlled Switching
• Multiple Switching Control Points
• 4 Stereo Inputs to 1 Stereo Output
• Line-Level Audio Switching
• Balanced or Unbalanced Inputs and Output
• Gain Trim on Each Source
• Controllable Using Various RDL Remote Controls
• Open-Collector Output for Selected Input
 

Highlights

• Remote Controlled Switching and Level Control
• Multiple Remote Control Locations Possible
• 4 Stereo Inputs to 1 Stereo Output
• Line-Level Audio Switching
• External Level Control Using 10 kΩ Potentiometer or 0 to 10 Vdc
• 96 dB Attenuation Range in 0.5 dB Steps
• Noiseless Zero-Crossing Adjustment Steps
• Precise Level Tracking on Each Channel
• Balanced or Unbalanced Inputs and Output
• Gain Trim on Each Source
• Controllable Using Various RDL Remote Controls
• Open-Collector Output for Selected Input
 

Highlights

• Mounts One RDL RACK-UP® Series Product Below a Horizontal Surface
• Black Powder Coated Finish to Match RACK-UP®s
• All-Steel Construction
 

Highlights

• Mounts One RDL, or Other, Decora-Style Product in an RDL RACK-UP® Style Rack Adapter
• Ideal for Mounting RDL D-Series Remote Controls, Connector Plates and Loudspeakers
• Durable Laminate Front-panel Matches Appearance of RDL RACK-UP® Products
 

Highlights

• 3-Band Audio Equalizer
• Custom Tailored Audio Bandwidth
• User-Accessible Adjustments
• High-Density Rack-Mount Convenience
• Low-Noise, Low-Distortion Equalizer
 

Highlights

• Converts RDL Format-A and Aux Source to Four Dante Network Channels
• Easy Installation with Format-A Connections on RJ45 through CATx Cable
• Format-A Audio Sources from Pairs A, B and C Converted to Dante
• Fourth Dante Audio Channel Fed from Unbalanced or Balanced Aux Line Input
• Front-Panel Gain Adjustment with Dual-LED VU Meter for Aux Input
• Signal LEDs Indicate Audio for Each of the Three Format-A Pairs
• High Resolution 24 Bit Analog to Digital Conversion
• Legendary RDL Analog Filtering Enhances Superb Audio Performance
• Powers Remote Format-A Senders through Format-A Input Jack
• LED Indicators Show Network Sync Status
• Normal or Hot-Standby Operation from PoE (Model RU-FNP)
• Compatible with Wide Array of RDL Format-A Active and Passive Senders
• Equipped for Rack Mounting or Surface Mounting
 

Highlights

• Converts RDL Format-A and Aux Source to Four Dante Network Channels
• Easy Installation with Format-A Connections on RJ45 through CATx Cable
• Format-A Audio Sources from Pairs A, B and C Converted to Dante
• Fourth Dante Audio Channel Fed from Unbalanced or Balanced Aux Line Input
• Front-Panel Gain Adjustment with Dual-LED VU Meter for Aux Input
• Signal LEDs Indicate Audio for Each of the Three Format-A Pairs
• High Resolution 24 Bit Analog to Digital Conversion
• Legendary RDL Analog Filtering Enhances Superb Audio Performance
• Powers Remote Format-A Senders through Format-A Input Jack
• LED Indicators Show Network Sync Status
• Normal or Hot-Standby Operation from PoE (Model RU-FNP)
• Compatible with Wide Array of RDL Format-A Active and Passive Senders
• Equipped for Rack Mounting or Surface Mounting
 

Highlights

• Fills Unused Openings in any RDL RACK-UP® Series Mounting Adapter
• Matches the Appearance of RDL RACK-UP® Series Products
• All-Steel Construction
 

Highlights

• Mounts One RDL RACK-UP® Series Product in a 10.4″ Rack
• Occupies One RU in a 10.4″ Rack
• Easy Installation with Provision for Cable Harnessing
• All-Steel Construction
 

Highlights

• Converts Standard Line-Level Audio Sources to Dante Network Channels
• Line-Level Inputs Accept Unbalanced -10 dBV or Balanced +4 dBu Signals with > 18 dB Headroom
• Front-Panel Gain Adjustment with Dual-LED VU Meter for Each Audio Input
• Converts Two Dante Network Audio Signals to Balanced Line Level
• Line-Level Outputs Provide +4 dBu with > 18 dB Headroom
• Signal LEDs Indicate Audio for Each of the Received Network Signal Channels
• Interfaces Two Dante Inputs and Two Dante Outputs
• High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
• Legendary RDL Analog Filtering Enhances Superb Audio Performance
• LED Indicators Show Network Sync Status
• Normal or Hot-Standby Operation from PoE (Model RU-LB2P)
• Equipped for Rack Mounting or Surface Mounting
 

Highlights

• Converts Standard Line-Level Audio Sources to Dante Network Channels
• Line-Level Inputs Accept Unbalanced -10 dBV or Balanced +4 dBu Signals with > 18 dB Headroom
• Front-Panel Gain Adjustment with Dual-LED VU Meter for Each Audio Input
• Converts Two Dante Network Audio Signals to Balanced Line Level
• Line-Level Outputs Provide +4 dBu with > 18 dB Headroom
• Signal LEDs Indicate Audio for Each of the Received Network Signal Channels
• Interfaces Two Dante Inputs and Two Dante Outputs
• High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
• Legendary RDL Analog Filtering Enhances Superb Audio Performance
• LED Indicators Show Network Sync Status
• Normal or Hot-Standby Operation from PoE (Model RU-LB2P)
• Equipped for Rack Mounting or Surface Mounting
 

Highlights

• Converts Standard Line-Level Audio Sources to Dante Network Channels
• Line-Level Inputs Accept Unbalanced -10 dBV or Balanced+4 dBu Signals with >18 dB Headroom
• Front-Panel Gain Adjustment with Dual-LED VU Meter for Each Audio Input
• Converts Four Dante Network Audio Signals to Balanced Line Level
• Line-Level Outputs Provide +4 dBu with >18 dB Headroom
• Signal LEDs Indicate Audio for Each of the Received Network Signal Channels
• Interfaces Four Dante Inputs and Four Dante Outputs
• High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
• Legendary RDL Analog Filtering Enhances Superb Audio Performance
• LED Indicators Show Network Sync Status
• Normal or Hot-Standby Operation from PoE (Model RU-LB4P)
• Equipped for Rack Mounting or Surface Mounting
 

Highlights

• Converts Standard Line-Level Audio Sources to Dante Network Channels
• Line-Level Inputs Accept Unbalanced -10 dBV or Balanced+4 dBu Signals with >18 dB Headroom
• Front-Panel Gain Adjustment with Dual-LED VU Meter for Each Audio Input
• Converts Four Dante Network Audio Signals to Balanced Line Level
• Line-Level Outputs Provide +4 dBu with >18 dB Headroom
• Signal LEDs Indicate Audio for Each of the Received Network Signal Channels
• Interfaces Four Dante Inputs and Four Dante Outputs
• High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
• Legendary RDL Analog Filtering Enhances Superb Audio Performance
• LED Indicators Show Network Sync Status
• Normal or Hot-Standby Operation from PoE (Model RU-LB4P)
• Equipped for Rack Mounting or Surface Mounting
 

Highlights

• Two-channel Audio Preamplifier
• Front Panel XLR Input / Output Jacks
• Detachable Input / Output Terminal Blocks
• Switch-selectable Mic or Line Inputs
• Switch-selectable Mic Gain and Phantom
• Gain Trim on Each Input
• Each Output Switch-selectable Mic or Line
 

Highlights

• Interfaces Two Dante Inputs and Two Dante Outputs
• Converts Two Standard Mic or Line Audio Sources to Dante Network Channels
• Each Input is Switch-Selectable for Mic or Line
• No User or Installer Gain Adjustments are Required
• Automatic Microphone Gain of 40 dB for Condenser Mics and 60 dB for Dynamic Mics
• P48 Phantom is Provided on Each Microphone Input
• Line-Level Inputs Accept Unbalanced -10 dBV or Balanced +4 dBu Signals with > 18 dB Headroom
• Front-Panel Signal LED for Each Audio Input
• Converts Two Dante Network Audio Signals to Balanced Line Level
• Line-Level Outputs Provide +4 dBu with > 18 dB Headroom
• Signal LEDs Indicate Audio for Each of the Received Network Signal Channels
• High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
• Legendary RDL Analog Filtering Enhances Superb Audio Performance
• LED Indicators Show Network Sync Status
• Normal or Hot-Standby Operation from PoE (Model RU-MLB2P)
• Equipped for Rack Mounting or Surface Mounting
 

Highlights

• Interfaces Two Dante Inputs and Two Dante Outputs
• Converts Two Standard Mic or Line Audio Sources to Dante Network Channels
• Each Input is Switch-Selectable for Mic or Line
• No User or Installer Gain Adjustments are Required
• Automatic Microphone Gain of 40 dB for Condenser Mics and 60 dB for Dynamic Mics
• P48 Phantom is Provided on Each Microphone Input
• Line-Level Inputs Accept Unbalanced -10 dBV or Balanced +4 dBu Signals with > 18 dB Headroom
• Front-Panel Signal LED for Each Audio Input
• Converts Two Dante Network Audio Signals to Balanced Line Level
• Line-Level Outputs Provide +4 dBu with > 18 dB Headroom
• Signal LEDs Indicate Audio for Each of the Received Network Signal Channels
• High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
• Legendary RDL Analog Filtering Enhances Superb Audio Performance
• LED Indicators Show Network Sync Status
• Normal or Hot-Standby Operation from PoE (Model RU-MLB2P)
• Equipped for Rack Mounting or Surface Mounting
 

Highlights

• Interfaces Four Dante Inputs and Four Dante Outputs
• Converts Four Standard Mic or Line Audio Sources to Dante Network Channels
• Each Input is Switch-Selectable for Mic or Line
• No User or Installer Gain Adjustments are Required
• Automatic Microphone Gain of 40 dB for Condenser Mics and 60 dB for Dynamic Mics
• P48 Phantom is Provided on Each Microphone Input
• Line-Level Inputs Accept Unbalanced -10 dBV or Balanced +4 dBu Signals with > 18 dB Headroom
• Front-Panel Signal LED for Each Audio Input
• Converts Four Dante Network Audio Signals to Balanced Line Level
• Line-Level Outputs Provide +4 dBu with > 18 dB Headroom
• Signal LEDs Indicate Audio for Each of the Received Network Signal Channels
• High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
• Legendary RDL Analog Filtering Enhances Superb Audio Performance
• LED Indicators Show Network Sync Status
• Normal or Hot-Standby Operation from PoE (Model RU-MLB4P)
• Equipped for Rack Mounting or Surface Mounting
 

Highlights

• Interfaces Four Dante Inputs and Four Dante Outputs
• Converts Four Standard Mic or Line Audio Sources to Dante Network Channels
• Each Input is Switch-Selectable for Mic or Line
• No User or Installer Gain Adjustments are Required
• Automatic Microphone Gain of 40 dB for Condenser Mics and 60 dB for Dynamic Mics
• P48 Phantom is Provided on Each Microphone Input
• Line-Level Inputs Accept Unbalanced -10 dBV or Balanced +4 dBu Signals with > 18 dB Headroom
• Front-Panel Signal LED for Each Audio Input
• Converts Four Dante Network Audio Signals to Balanced Line Level
• Line-Level Outputs Provide +4 dBu with > 18 dB Headroom
• Signal LEDs Indicate Audio for Each of the Received Network Signal Channels
• High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
• Legendary RDL Analog Filtering Enhances Superb Audio Performance
• LED Indicators Show Network Sync Status
• Normal or Hot-Standby Operation from PoE (Model RU-MLB4P)
• Equipped for Rack Mounting or Surface Mounting
 

Highlights

• Distribution Amplifier with Four Outputs
• Front Panel XLR Input / Output Jacks
• Detachable Input / Output Terminal Blocks
• Switch-selectable Mic or Line Input
• Switch-selectable Mic Gain and Phantom
• Gain Trim on Input
• Each Output Switch-selectable Mic or Line
 

Highlights

• Distribution Amplifier with Four Outputs
• Front Panel XLR Input / Output Jacks
• Detachable Input / Output Terminal Blocks
• Switch-selectable Mic or Line Input
• Switch-selectable Mic Gain and Phantom
• Gain Trim on Input
• Each Output Switch-selectable Mic or Line
 

Highlights

• Four Channel Audio Mixer with Expansion Capability
• XLR Microphone Inputs, Phono Jack Line Inputs
• Switchable 24 V Phantom for Each Mic Input
• Mic or Line XLR Output, Switchable
• Unbalanced Line Output and Direct Input
• Integral Compressor/Limiter, Switchable
• Studio-Quality, Low-Noise Performance
 

Highlights

• Four Channel Line-Level Audio Mixer
• XLR Balanced, Phono Jack Unbalanced Inputs
• Mic or Line XLR Output, Switchable
• Unbalanced Line Output and Direct Input
• Studio Quality, Low-Noise Performance
• Expansion Bussing Capability
• Additional Line Inputs Bussed to an RU-MX4
• Output Isolation Transformer (RU-MX4LT)
 

Highlights

• Four Channel Line-Level Audio Mixer
• XLR Balanced, Phono Jack Unbalanced Inputs
• Mic or Line XLR Output, Switchable
• Unbalanced Line Output and Direct Input
• Studio Quality, Low-Noise Performance
• Expansion Bussing Capability
• Additional Line Inputs Bussed to an RU-MX4
• Output Isolation Transformer (RU-MX4LT)
 

Highlights

• Four Channel Audio Mixer with Expansion Capability
• XLR Microphone Inputs, Phono Jack Line Inputs
• Switchable 24 V Phantom for Each Mic Input
• Mic or Line XLR Output, Switchable
• Unbalanced Line Output and Direct Input
• Integral Compressor/Limiter, Switchable
• Studio-Quality, Low-Noise Performance
 

Highlights

• Mic or Line Level Audio Mixer
• Five Channel Audio Mixer with Expansion Capability
• Inputs and Outputs on Detachable Terminal Blocks
• Switchable 24 V Phantom for Each Mic Input
• Balanced Mic and Line Outputs
• Expansion Bussing Capability
• Output Level dual-LED VU Metering
• Studio-Quality, Low-Noise Performance
 

Highlights

• Converts Four Dante Network Audio Signals to RDL Format-A and Aux
• Easy Installation with Format-A Connections on RJ45 through CATx Cable
• Three Dante Audio Signals Feed Format-A Output Pairs A, B and C
• Fourth Dante Audio Signal Feeds Auxiliary Balanced +4 dBu Line Output
• Format-A Pairs are Distributed to Three Separate Format-A Output Jacks
• Signal LEDs Indicate Audio for Each of the Four Received Network Signal Channels
• High Resolution 24 Bit Digital to Analog Conversion
• Legendary RDL Analog Filtering Enhances Superb Audio Performance
• Powers Remote Format-A Receivers through Primary Output Jack
• External 24 Vdc Supply Powers Format-A Receivers through All Output Jacks
• LED Indicators Show Network Sync Status
• Outputs Mute when Digital Audio Inputs are Inactive
• Normal or Hot-Standby Operation from PoE (Model RU-NFDP)
• Compatible with Wide Array of RDL Format-A Active and Passive Receivers
• Equipped for Rack Mounting or Surface Mounting
 

Highlights

• Converts Four Dante Network Audio Signals to RDL Format-A and Aux
• Easy Installation with Format-A Connections on RJ45 through CATx Cable
• Three Dante Audio Signals Feed Format-A Output Pairs A, B and C
• Fourth Dante Audio Signal Feeds Auxiliary Balanced +4 dBu Line Output
• Format-A Pairs are Distributed to Three Separate Format-A Output Jacks
• Signal LEDs Indicate Audio for Each of the Four Received Network Signal Channels
• High Resolution 24 Bit Digital to Analog Conversion
• Legendary RDL Analog Filtering Enhances Superb Audio Performance
• Powers Remote Format-A Receivers through Primary Output Jack
• External 24 Vdc Supply Powers Format-A Receivers through All Output Jacks
• LED Indicators Show Network Sync Status
• Outputs Mute when Digital Audio Inputs are Inactive
• Normal or Hot-Standby Operation from PoE (Model RU-NFDP)
• Compatible with Wide Array of RDL Format-A Active and Passive Receivers
• Equipped for Rack Mounting or Surface Mounting
 

Highlights

• Converts Two Dante Network Audio Signals to Professional Line Level
• Line-Level Outputs Provide +4 dBu with > 18 dB Headroom
• Exceptional Low-Noise and Low-Distortion Performance
• Crosstalk Below the Noise Floor
• Signal LEDs Indicate Audio for Each of the Dante Audio Sources
• High Resolution 24 Bit Digital to Analog Conversion
• Legendary RDL Analog Filtering Enhances Superb Audio Performance
• LED Indicators Show Network Sync Status
• Outputs Mute when Digital Audio Inputs are Inactive
• Normal or Hot-Standby Operation from PoE (Model RU-NL2P)
• Equipped for Rack Mounting or Surface Mounting
 

Highlights

• Converts Two Dante Network Audio Signals to Professional Line Level
• Line-Level Outputs Provide +4 dBu with > 18 dB Headroom
• Exceptional Low-Noise and Low-Distortion Performance
• Crosstalk Below the Noise Floor
• Signal LEDs Indicate Audio for Each of the Dante Audio Sources
• High Resolution 24 Bit Digital to Analog Conversion
• Legendary RDL Analog Filtering Enhances Superb Audio Performance
• LED Indicators Show Network Sync Status
• Outputs Mute when Digital Audio Inputs are Inactive
• Normal or Hot-Standby Operation from PoE (Model RU-NL2P)
• Equipped for Rack Mounting or Surface Mounting
 

Highlights

• Converts Four Dante Network Audio Signals to Professional Line Level
• Line-Level Outputs Provide +4 dBu with > 18 dB Headroom
• Exceptional Low-Noise and Low-Distortion Performance
• Crosstalk Below the Noise Floor
• Signal LEDs Indicate Audio for Each of the Four Dante Audio Sources
• High Resolution 24 Bit Digital to Analog Conversion
• Legendary RDL Analog Filtering Enhances Superb Audio Performance
• LED Indicators Show Network Sync Status
• Outputs Mute when Digital Audio Inputs are Inactive
• Normal or Hot-Standby Operation from PoE (Model RU-NL4P)
• Equipped for Rack Mounting or Surface Mounting
 

Highlights

• Converts Four Dante Network Audio Signals to Professional Line Level
• Line-Level Outputs Provide +4 dBu with > 18 dB Headroom
• Exceptional Low-Noise and Low-Distortion Performance
• Crosstalk Below the Noise Floor
• Signal LEDs Indicate Audio for Each of the Four Dante Audio Sources
• High Resolution 24 Bit Digital to Analog Conversion
• Legendary RDL Analog Filtering Enhances Superb Audio Performance
• LED Indicators Show Network Sync Status
• Outputs Mute when Digital Audio Inputs are Inactive
• Normal or Hot-Standby Operation from PoE (Model RU-NL4P)
• Equipped for Rack Mounting or Surface Mounting
 

Highlights

• Six Networked 4 x 1 Virtual Audio Mixers Dante / AES67
• Four Dante Network Inputs Feed Each Mixer
• Four Mixer Outputs Feed Dante Network Channels
• Two Mixer Outputs Feed Balanced Line-Level Outputs
• A Pair of Mixers may be Configured for Stereo Audio
• Module is Configured and Adjusted Using Network Control Software
• Compatible with RDL Networked Remote Controls
• Provides Level Adjustment in 1 dB Steps for Each Input of Each Mixer
• Provides Level Adjustment in 1 dB Steps for the Output of Each Mixer
• Automatic (VOX) Priority Ducking Assignable on Each Virtual Mixer
• Priority May be assigned to One of the Four Received Network Channels
• Selectable High Pass Filters for the Priority Input
• Adjustable Ducking Threshold, Attenuation Level and Recovery Delay
• Provides Four Stored Preset Configurations for Routing, Mixing and Levels
• Presets Activated by Network Commands, at Power-Up, or Using RDL RC4M Remote Control
• LED Indicators for Power and Network Sync
• Operation from PoE Power (Class 0, IEEE 802.3af) or external 24 Vdc
 

Highlights

• VCA Controlled Stereo Audio Power Amplifier
• 20 Watts RMS per Channel into 8 Ω – 40 Watts Total
• 15 Watts RMS per Channel into 4 Ω – 30 Watts Total
• Unbalanced RCA Jack Inputs; Balanced Detachable Terminal Block Inputs
• VCA Control on Detachable Terminal Block
• External Control Using 10 KΩ Potentiometer or 0 to 10 Vdc
• Compatible with RDL Remote Level Controls
• Switch-Selectable Stereo or Mono Operation
• Studio Quality, Aurally Transparent Compressor/Limiter
• Compressor/Limiter Controls Clipping
• Compressor Produces Maximized Average Output Power
• Compression Enabled Using Input Level Adjustments
• LED to Indicate Audio Compression Threshold
• High-Efficiency Class D Operation
• Thermal and Short-Circuit Protection
• RU-PA40D includes North American Cord; RU-PA40DE excludes Power Cord
 

Highlights

• 9 W RMS per Channel Stereo into 4 Ω
• 18 W RMS Mono into 8 Ω
• Selectable Stereo or Bridged Mono
• Selectable Built-In Peak Limiter
• 1/3 Rack, High-Density Rack Mounting
• Front-Panel Control for 2 Inputs
 

Highlights

• Mounts up to Three RDL RACK-UP® Series Products in a 19″ Rack
• Occupies One RU in a 19″ Rack
• Easy Installation with Provision for Cable Harnessing
• All-Steel Construction
 

Highlights

• Conversion RS-232 ⇔ RS-422
• Serial Data Over Long Lines
• Rack-Mountable Convenience
 

Highlights

• Rack-Mounted Headphone Amplifier
• RACK-UP® Series Headphone Amplifier
• Integral Long-Life VCA Stereo Level Control
• Balanced or Unbalanced Inputs
• Switch-Selectable Input Sensitivity
• Switch-Selectable Mono (Left) or Stereo Operation
• Amplifier To Drive High or Low Impedance Headsets
 

Highlights

• Precision Audio Level Metering
• Digital 16 LED String Display Indication
• Two Mono Meters or Stereo Metering
• Line-Level, Speaker-Level or 25/70/100 V Audio Input
• Selectable Fixed or Variable Calibration
• Individual Channel Calibration Controls
• Selectable Peak or Average Metering
• Peak-Hold Display for +10, +14, +18 dB
 

Highlights

• Precision Audio Level Metering
• Digital 16 LED String Display Indication
• Four Mono Meters or Dual Stereo Metering
• Line-Level, Speaker-Level or 25/70/100 V Audio Input
• Selectable Fixed or Variable Calibration
• Individual Channel Calibration Controls
• Selectable Peak or Average Metering
• Peak-Hold Display for +10, +14, +18 dB
 

Highlights

• Mounts One RDL RACK-UP® Series Product in a Cabinet or Other Flat Surface
• Ideal for Mounting RDL AMS Accessories Fastened in an AMS-RU4
• All-Steel Construction
 

Highlights

• Control of Sequential Power-Up or Events
• Adjustable Up/Down Time Interval
• Open-collector Outputs
• Relay Contact Closures
• Up to Six Sequential Events
• Sure-Lok™ Output Supervision
 

Highlights

• Power Four Sets of Remote Senders and Receivers from a Convenient Location
• 24 Vdc Input on dc Power Jack or Detachable Terminal Block
• Blue Power LED Shows Module is Receiving Power
• Green LEDs Indicate Correct dc Output Voltage on RJ45s
• Two Associated RJ45s Provided for Each Power Output
• One Associated RJ45 may Power Receivers
• The Other Associated RJ45 may Power Senders
• High-Density Rack Mounting Using RACK-UP Accessories
 

Highlights

• Input Jack Accepts Signals from All FORMAT-A Senders
• Output Jacks Drive All FORMAT-A Receivers
• Four Receivers may be Driven From Each Distributor
• LOOP OUT Jack Can Feed Additional Distributor
• Power Bus Provides Expansion to Adjacent Distributors
• Powers All Connected Senders and Receivers
• Dual-LED VU Meters Display the Level on Each Pair
• Blue Power LED Shows the Module is Receiving dc Power
• Rear-Panel LEDs Indicate Correct Output Voltage on RJ45s
• High-Density Rack Mounting Using RACK-UP Accessories
 

Highlights

• Balanced or Unbalanced Line-Level Inputs
• Front-Panel Trimmer Adjusts Level for Each Pair
• Dual-LED VU Meters Display the Level of Each Pair
• Output Jacks Drive All FORMAT-A Receivers
• Drive Up to Four Receivers From Each Distributor
• All Connected Receivers Powered from Distributor
• Blue Power LED Shows the Module is Receiving dc Power
• Rear-Panel LEDs Indicate Correct Output Voltage on RJ45s
• Power Bus Provides Expansion to Adjacent Distributors
• High-Density Rack Mounting Using RACK-UP Accessories
 

Highlights

• Stereo Unbalanced Audio Distribution
• Unity Gain on Both Channels
• Four Outputs per Channel
• Stand Alone or Rack-Mountable
• Exceptional Audio Performance
• 1/3 Rack, High-Density Rack Mounting
 

Highlights

• Video Attenuation
• Two Channels
• Front-Panel Level Adjustment
• Stand Alone or Rack-Mountable
• 75 Ω Attenuators
• 1/3 Rack, High-Density Rack Mounting
 

Highlights

• Local or Remote Audio Level Control
• Mono or Stereo Attenuation
• Noiseless Zero-Crossing Adjustment Steps
• 96 dB Attenuation Range in 0.5 dB Steps
• Data Bus Provides Adjustment of Multiple Modules
• Multiple Remote Control Locations Possible
• Precise Level Tracking on Each Channel
• Balanced or Unbalanced Line Inputs/Outputs
• Adjustable Ramp Up/Down Rates
• Controllable Using Various RDL Remote Controls
• Selectable Level Control Options:
• Pushbuttons (Internal or External)
• Momentary Pulses (External/Rotary Encoder)
• 0 to10 Vdc or 10 kΩ Potentiometer
• Selectable Power-Up Return to PRESET or LAST Level
• Selectable MASTER/SLAVE Mode for Control Expansion
 

Highlights

• Local or Remote Audio Level Control
• Six Channel / Surround Attenuation
• Noiseless Zero-Crossing Adjustment Steps
• 96 dB Attenuation Range in 0.5 dB Steps
• Data Bus Provides Adjustment of Multiple Modules
• Multiple Remote Control Locations Possible
• Precise Level Tracking on Each Channel
• Balanced or Unbalanced Line Inputs/Outputs
• Adjustable Ramp Up/Down Rates
• Controllable Using Various RDL Remote Controls
• Selectable Level Control Options:
• Pushbuttons (Internal or External)
• Momentary Pulses (External/Rotary Encoder)
• 0 to10 Vdc or 10 kΩ Potentiometer
• Selectable Power-Up Return to PRESET or LAST Level
• Selectable MASTER/SLAVE Mode for Control Expansion
 

Highlights

• Video Distribution with 4 Outputs
• Adjustable Gain Amplification
• Input LOOP OUT Jack
• Video 1 Volt Signal Indicator
• 10 MHz Bandwidth, NTSC or PAL
• 1/3-Rack, High-Density Rack Mounting